To test impedance or offset, download a design: EEG + Impedance or Offset EEG & HEG + Impedance   How to test For Impedance, in Wiz window select Settings | Mode | 4 Channel and Helper | Impedance Check Under 20 kOhm is good; up to 50 kOhm is serviceable For Offset, in Wiz window […]

About BioExplorer software program receives, processes, and displays data from a biofeedback Device. BioExplorer uses the current Design to tell it how to process and display that data from the device. Learn about using BioExplorer with Help Topics and Tutorials. Click on “Help” from the main menu bar and select the desired item (e.g. BioExplorer Help […]

The goal of LIFE is to score as many points as possible by adding animals to the training field, and to add larger animals with higher point values by climbing higher or diving deeper. There are brief coaching files that you can listen to in order to better understand the process. Press Climb Coach or […]

Install Driver After you have run your setup file(s) provided by Brain-Trainer you are ready to connect your biofeedback device (amplifier). You may have already installed a file called pnWirelessDongleDriver or Amplifier setup, etc. If not, it may install automatically following the next steps.     USB dongle key must be plugged in. BioExplorer software will […]

Audio files do not play (BioExplorer) Check to see if audio files are loaded and available. If not, load them yourself and save the design. Select Tools | Volumes, double-click on “Chants” audio player If using .mp3 files, replace them with .wav files. Design fails to open/BioExplorer crashes when opening A/T design (BioExplorer) On another […]

Your setup file should already be saved to your computer and extracted (unzipped). Double-click on the BxShadow .msi setup file. Advance through the setup wizard until complete. You should find an icon shortcut on your desktop to launch the BxShadow application. BxShadow User Guide (1.01 MB)

Blank screen, no control panel or landscape Solution: Run latest LIFE setup file Open design from DocumentsBioExplorerDesigns See Loading flash files: Flash storage message Solution:  Change flash storage settings Failed to create Flash Player. Macromedia Flash version … must be installed. Close BioExplorer. Follow instructions on restoring flash. Open BioExplorer again. Flash files not fully […]

1. Connect amplifier to computer Connect your amplifier cable into your amplifier and then to the computer’s USB port. 1. Open BioExplorer USB dongle key must be plugged in. 2. Resize BioExplorer window For quick access to PN Wiz window behind it Open Training design “BAL4C RH Bipolar” 1. Fill syringe with gel Preparing to […]

1. Detach Instruments Window Click Instruments from the menu bar Click Detach in the Instruments menu 2. Click on the window and drag it to the second monitor.   Detach Instruments Window video:

Connect USB dongle key. USB dongle key must be plugged in. BioExplorer software will not run without the USB key. Launch BioExplorer BioExplorer is open. No device has been added and no design (protocol screen) has been loaded yet. You should already have run your setup file(s) After you have run your setup file(s) provided […]